Product Description

CARRY OUT YOUR PROJECT WITH MAPEI

Mapei`s technologically advanced products, certified according to the most strict and demanding international standards, have always played a major part in the design and creation of large building projects, representing Italian excellence all around the world. Safe products for the environment, workers and users.

Products for Acoustic Insulation

• Mapei Mapesconic >> 
  Soundproofing acoustic membrane for use beneath ceramic, porcelain, natural and agglomerate stone floor finishes. Can be used on to concrete, screed, timber and existing ceramic finishes. Contains 80% recycled materials.

Products for Building

• Mapei Ultraplan Renovation Screed >> 
  It is a Fibre Reinforced Self-Levelling compound, designed for use in the refurbishment of existing floors in both commercial and domestic applications.  It can be hand or pump applied.

• MAPEI Mapefill GP >>
  It is for grouting voids in structural elements such as patching up honeycombs in concrete, filling gaps in precast elements and grouting base plates and bridge bearings.It can be used for anchoring mechanical equipment or steel bars, filling rigid joints between elements in concrete and precast concrete structures.

• MAPEI Mapesil AC & Primer FD >> 
  It is a one component, acetic-crosslinking, solvent free silicone sealant. It is mildew-resistant with low modulus of elasticity, available in 30 colours and transparent. Its uses include sealing joints in walls, joints between sinks, sanitary ware and tiles, sealing expansion joints and air ducts.

• MAPEI Mapesil LM >>
  is a neutral mould-resistant silicone sealant with very low emission level of volatile organic compounds (VOC) for stone and marble. It is a solvent free sealant with a low modulus of elasticity specifically formulated for sealing all materials sensitive to acids and plasticising agents, marble, granite, sandstone and quartz due to its chemical nature which deters surface bleeding or the migration of plasticising agents which would otherwise stain the substrate.

• Primer G>>  
  Water-based synthetic resin primer for treating gypsum or anhydrite substrates prior to installing ceramic tiles or stone material with cementitious adhesives. PRIMER G has very low emissions of TVOC. For minimising general dust suppression and reducing the absorption of very porous substrates.

• Mapei Planitop Fast 330 >> 
  Quick setting, fibre reinforced cementitious mortar for internal and external floors and walls. Suitable for laying ceramic and stone or for waterproofing with a liquid membrane or flexible cementitious systems.

• Mapei Planitop Smooth & Repair (Rasa & Ripara)>> 
  Quick-setting, fiber-reinforced, shrinkage-compensated thixotropic cementitious mortar for repairing and smoothing concrete, may be applied in various thicknesses of 3 mm to 40 mm in a single layer

• Mapei Pulicol 2000 >> 
  For removing old natural and synthetic resin-based adhesives, paint and grouts/grout residue.

• Mapei Ultratop Blanco (White) >> 
  Self-leveling, ultra quick hardening mortar with special hydraulic binders. Used internally in public and industrial buildings, for leveling and smoothing new or existing concrete and ceramic substrates. Suitable for heavy pedestrian use in shopping centers, offices, shops, showrooms and areas where rubber-wheeled vehicles are in use.

• Mapei Topcem >> 
  Mapei Topcem is a special fast drying binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating.

• Mapei Wallgard Graffiti Barrier >>
  Liquid applied removable barrier suitable for protecting both porous and non-porous surfaces and facings from spray painted graffiti.

• Mapei Wallgard Graffiti Remover Gel >>
  Detergent for cleaning graffiti from most damaged surfaces. Easily applied, internally as well as externally, it cleans damaged areas after approximately 10 minutes without damaging the underlying surface.

Products for Cement 

• Mapei Nivoplan Blanco (White) >>
  Levelling mortar for internal and external walls and ceilings. Suitable for levelling “out of plumb” walls, rough or damaged renders and brick / block walls before fixing ceramic tiles.

• Mapei Nivoplan Grigio (Grey) >>
  Leveling mortar for internal and external walls and ceilings. Suitable for levelling “out of plumb” walls, rough or damaged renders and brick / block walls before fixing ceramic tiles.

• Mapei Ultratop Industrial >>
  Ultratop Industrial is used internally in industrial buildings, for leveling and smoothing new or existing concrete and screed substrates.

• Mapei Ultratop Stucco (Standard) >>
  Used whenever flooring made from Ultratop requires a perfectly smooth, flat, light-reflecting finish, or a special effect such as “polished” or “terazzo alla veneziana” as an alternative to the “natural” effect of unpolished self-leveling mortar.

Products for Wall Protection

• Mapei Plainitop Minera>> 
  Polymer modified cement based finished render coat for both internal and external applications. Can be used on walls or ceilings and provides enhanced thermal insulation as well as quick drying times in cold conditions.

Products for Waterproofing 

• Mapei Lamposilex >>
  Ultra fast setting and drying hydraulic binder for plugging any type of water leak even under pressure. Use in basements, tunnels, subways, watertight rigid joints, sewers, tanks and canals.

• Mapei Idrosilex Powder >>
  Powdered or liquid waterproofer for cementitious mortars

• Mapei PoroMap Rinzaffo >>
  Prepacked salt-resistant mortar to be applied before the dehumidifying and thermal insulating render PoroMap Intonaco

• Mapei PoroMap Intonaco >>
  This is a dehumidifying and insulating render suitable for both internal as well as external projects. Ideal for dealing with rising dampness in basements as well as buildings close to the sea, it is highly resistant to most salts. Suitable for old buildings where original mortars were used.
  

Products for Ceramic & Stone Materials 

• MAPEI Mapecem >> 
  can be used in the preparation of both floating and bonded screeds on existing and new slabs for the installation of wood, PVC, Linoleum, Ceramic tiles, Carpeting, or any other flooring where fast-drying is required for minimum downtime.

• MAPEI Mapelastic >>
  Two-component cementitious mortar, flexible down to -20 degrees C, for waterproofing and protection of concrete structures, renders and cement based screeds, such as balconies, terraces, bathrooms and swimming pools

• MAPEI Mapegum WPS >>
  Mapegum WPS is a flexible liquid membrane for waterproofing of indoor floor and wall surfaces that are not subject to rising damp. Ready to use, solvent free and fast drying. Can be used on plasterboard, gypsum, lightweight cement block and marine plywood.

• Mapei Epojet LV >> 
  2 Part low viscosity epoxy resin for filling or injecting cracks into screeds / concrete. Coverage 1.1kg per litre of cavity to be filled

• Mapei Eporip >> 
  2 Part epoxy resin for repairing cracks in screeds / concrete. Can also be used as a primer for tiling metal / steel surfaces. Coverage 1.35kg per litre of cavity to be filled.

• Mapei Mapetex System >>
  Isolation or separation matting for cracks in screeds. Ideal for use with timber sheeted floors before tiling and screeds containing underfloor heating which cannot be tested.

Products for Resilient and Textile Materials 

• MAPEI Mapelay >>
  Mapelay is a fibreglass-reinforced PVC waterproofing and isolating sheet, for internal laying of resilient and carpet flooring on cracked or particularly dirty or damp substrates or substrates subject to rising damp. Temporary protection of floors that could be damaged by heavy pedestrian traffic. It is 1.2 mm thick and  is available in rolls 25m long x 2m wide.

• MAPEI Mapeproof One Coat >> 
  It is a two-component, single-coat epoxy surface damp proof membrane for controlling residual, static and construction moisture in cementitious substrates.