Mapei Nivoplan Grigio (Grey)

Product Description

Leveling mortar for internal and external walls and ceilings. Suitable for leveling “out of plumb” walls, rough or damaged renders and brick / block walls before fixing ceramic tiles.

 

APPLICATION PROCEDURE
Preparing the substrate
The substrate must be compact, free of dust, loose parts and clean from oils, grease, paint or glue residues. Nivoplan can also be applied to damp surfaces without any problem, but cure time will be slightly prolonged. It is advisable to wet highly absorbent substrates (brick, foamed cement, etc.) before applying Nivoplan, especially if the layer is less than 3 mm thick. Nivoplan cannot be used on gypsum surfaces and the like, unless they are treated beforehand with Primer G. Preparing the mix Nivoplan should be mixed with clean water and stirred until a smooth, lump-free paste is obtained. It is advisable to use a mechanical stirrer. One 25-kg bag of Nivoplan should be mixed with 5.75-6.5 litres of water or with approx. 4.5 litres of water and 1-2 litres of Planicrete. The Nivoplan mix remains usable for 2 hours after mixing.

Applying the mix
It is invariably advisable to apply a first coat of Nivoplan to the substrate so as to ensure perfect coverage and then, without waiting, apply the layer necessary for good levelling, up to a maximum of 3 cm at a time.

SAFETY DATA SHEET
Mapei Nivoplan Grigio MSDS PDF

TECHNICAL DATA
Mapei Nivoplan TDS PDF