Ireland & Northern Ireland

062 76265
085 1234899

Mon - Fri: 9:00 - 17:30

WALL GUARDS

Acramit Optima

The product is addressed to protect building walls, where high risk of wall damage or getting dirty, mainly caused by people, forklift trucks or pallet trucks passing by, may appear.

The product is made of vinyl resin with the additive of acryl which is a material with very high hardness and is crack- resistant. Thanks to this combination, a really hard surface that is resistant to scratching or getting permanently dirty has been obtained.Its surface makes the material catch less dirt and it is easier to clean.Thanks to a wide colour range, it is suitable for interior finishes and design of public places such as : health care centres, schools, offices, shopping malls, hotels or even houses.It is recommended for straight walls with homogeneous structure. It is available in two assembly versions: self-adhesive and with the use of an assembly glue

PRODUCT‌ ‌REFERENCE‌ ‌

Acramit® Optima wall guard

LOCATION

Internal Installation

INSTALLATION

Self adhesive or installation with glue ‌ 

PROPERTIES

Durable, Hard Material

MATERIAL

Vinyl resin & acrylic

SIZE

Standard width: 110mm, 170mm, 220mm, 300mm, 600mm.
Commercial length: 4m

Acramit Super

The product is addressed to protect building walls, where high risk of wall damage or getting dirty, mainly caused by people,  forklift trucks or pallet trucks passing by, may appear.

The product is made of vinyl resin with the additive of acryl and, additionally, covered with the innovative outer acryl layer on both sides. The material possesses even higher hardness and is more crack- resistant than AkroLux ™.

Thanks to this combination, a really hard surface that is resistant to scratching or getting permanently dirty has been obtained. The acryl surface makes the material catch almost no dirt and it is easier to clean. Strong industrial detergents can be used for its cleaning.Thanks to a wide colour range, it is suitable for interior finishes and design of public places such as : health care centres, schools, offices, shopping malls, hotels or even houses.

The acryl layer makes the material UV radiation- resistant, as a result it does not decolour while being exposed to sunlight.It is recommended for straight walls with homogeneous structure. It is available in two assembly versions: self-adhesive and with the use of an assembly glue.

PRODUCT‌ ‌REFERENCE‌ ‌

Acramit® Super Wall Guard

LOCATION

Internal Installation

INSTALLATION

Self adhesive or installation with glue ‌ 

PROPERTIES

Durable, Hard Material

MATERIAL

Vinyl resin & acrylic

SIZE

Standard width: 110mm, 170mm, 220mm, 300mm, 600mm.
Commercial length: 4m

Acramit Super Wall Plate

The product is addressed to protect building walls, where high risk of wall damage or getting dirty, mainly caused by people, forklift trucks or pallet trucks passing by, may appear.

The product is made of vinyl resin with the additive of acryl which is a material with very high hardness and is crack- resistant. Thanks to this combination, a really hard surface that is resistant to scratching or getting permanently dirty has been obtained.

Its surface makes the material catch less dirt and it is easier to clean.

Thanks to a wide colour range, it is suitable for interior finishes and design of public places such as : health care centres, schools, offices, shopping malls, hotels or even houses.

It is recommended for straight walls with homogeneous structure. It is available in two assembly versions: self-adhesive and with the use of an assembly glue.

Wall decorations cut out of Acramit plates provide modern interior design and long-lasting investment in protecting walls against damage and dirt.

A wide choice of ready-made patterns and colours together with the possibility to make your own design according to your requirements, enables to make individual adjustments to almost every space.

The material used for producing the plates is characteristic for its high resistance to damage, dirt and chemicals.

PRODUCT‌ ‌REFERENCE‌ ‌

Acramit® Super Wall Plate

LOCATION

Internal Installation

INSTALLATION

Self adhesive or installation with glue ‌ 

PROPERTIES

  • Stain resistance
  • Resistance to damage
  • Easy to clean

MATERIAL

Vinyl resin & acrylic

SIZE

Size: 300cm x 125cm – The cutting service available.
Thickness: standard 2mm (to order: 2 – 4mm)

Acramit Wall Plate

The product is addressed to protect building walls, where high risk of wall damage or getting dirty, mainly caused by people,  forklift trucks or pallet trucks passing by, may appear.

The product is made of vinyl resin with the additive of acryl and, additionally, covered with the innovative outer acryl layer on both sides. The material possesses even higher hardness and is more crack- resistant than AkroLux ™. Thanks to this combination, a really hard surface that is resistant to scratching or getting permanently dirty has been obtained.

The acryl surface makes the material catch almost no dirt and it is easier to clean. Strong industrial detergents can be used for its cleaning.

Thanks to a wide colour range, it is suitable for interior finishes and design of public places such as : health care centres, schools, offices, shopping malls, hotels or even houses. The acryl layer makes the material UV radiation- resistant, as a result it does not decolour while being exposed to sunlight.

It is recommended for straight walls with homogeneous structure. It is available in two assembly versions: self-adhesive and with the use of an assembly glue.

Wall decorations cut out of Acramit plates provide modern interior design and long-lasting investment in protecting walls against damage and dirt.

A wide choice of ready-made patterns and colours together with the possibility to make your own design according to your requirements, enables to make individual adjustments to almost every space.

The material used for producing the plates is characteristic for its high resistance to damage, dirt and chemicals.

PRODUCT‌ ‌REFERENCE‌ ‌

Acramit® Wall Plates

LOCATION

Internal Installation

INSTALLATION

Self adhesive or installation with glue ‌ 

PROPERTIES

  • Hard acrylic coating
  • Resistance to UV rays
  • Resistance to dirt
  • Very high resistance to damage
  • Easy to clean

MATERIAL

Vinyl resin & acrylic

SIZE

Size: 300cm x 110cm – The cutting service available.

Thickness: standard 2,5mm (to order: 2 – 4mm)

Bridge Wall Guard

Bridge Wall guard consists on a highly durable PVC cover and aluminium core. An Eco type of wall guard consists on the core made of PVC material in a grey colour. Endings of wall guard are mount on special latches.If it is necessary the latch enables fast removement of endings. As an example it is helpfull if a PVC cover needs to be clean or requires replacement. Thanks to properly bent PVC cover it has got a very good shock absorbing properties. What is more wall guard protects wall against being dirt and damaged. The construction of the wall guard provides standard protection against hitting,scratching. The wall guard Bridge is designed to corridors, offices,hospital rooms,classrooms,etc..

 

PRODUCT‌ ‌REFERENCE‌ ‌

Bridge Wall Guard

LOCATION

Internal Installation

INSTALLATION

Drilled

PROPERTIES

50mm Domed Protection

MATERIAL

Aluminium Base & PVC Cover

SIZE

Depth:50mm
Available width: 150mm
Commercial length: 3m

Flat Elastic Wall Guard

Elastic wall guard has all properties characteristic for the flat wall guard and can be used instead of it. In addition, it is designed to protect walls with shapes different from rectangular (oval, round) The elastic wall guard can be cut with a knife or scissors. It is an ideal solution for places with irregular wall structure (semicircles, corners).

Fast assembly to the wall by means of a self-adhesive tape. A wide range of colours.

When used as a door shock absorber, it prevents walls from getting damaged caused by the constant pedestrian traffic or trolleys and it hides already existing damages

PRODUCT‌ ‌REFERENCE‌ ‌

Acramit Optima Wall Guard

LOCATION

Internal Installation

INSTALLATION

Drilled

PROPERTIES

Flexible Bending Material

MATERIAL

Flexible

SIZE

Available width: 110mm, 160mm, 210mm, 310mm

Commercial length: 1lm

Garage Wall Guard

It protects walls in places with high intensity of vehicle traffic. Elastic rubber successfully prevents the wall or the car from getting scratched . It can be used inside or outside the building ( f.ex.: in halls, garages, car parks, warehouses, workshops)

Wall guards can be used in: garages, shops (protection against the edges of trolleys), car parks, warehouses, public places ( as an outside wall guard), for trailers.

Its springy frame absorbs shocks protecting walls and other moving vehicles which have a contact with the wall.

The wall guard consists of a durable frame fixed to the wall and a flexible shock-absorbing cover, which is fixed directly to the frame. At the edges of the wall guard, there are plugs that hide the endings.

PRODUCT‌ ‌REFERENCE‌ ‌

Garage Wall Guard

LOCATION

Internal Installation

INSTALLATION

Drilled

PROPERTIES

Cushioning Soft Construction

MATERIAL

Elastic Rubber

SIZE

Commercial length: 1m, 1.5m, 2m
Width 90 mm

Handrail Wall Guard

The product is addressed to protect building walls, where there is a high risk of wall damage or getting dirty, mainly caused by people, chairs, and hospital beds. .

The product is made of an aluminium base and pvc cover.  Thanks to this combination, a really hard surface. Thanks to a wide colour range, it is suitable for interior finishes and design of public places such as : health care centres, schools, offices, shopping malls or hotels. 

PRODUCT‌ ‌REFERENCE‌ ‌

Acramit Optima Wall Guard

LOCATION

Internal Installation

INSTALLATION

Drilled

PROPERTIES

Easy to Move
Protects wall from damage

MATERIAL

Plastic with Aluminium Base

SIZE

Standard width: 150 mm
Standard thickness: 35 mm

Optima Alu Wall Guard

The product is addressed to protect building walls, where there is a high risk of wall damage or getting dirty, mainly caused by people, chairs, and hospital beds. .

The product is made of an aluminium base and pvc cover.  Thanks to this combination, a really hard surface. Thanks to a wide colour range, it is suitable for interior finishes and design of public places such as : health care centres, schools, offices, shopping malls or hotels. 

PRODUCT‌ ‌REFERENCE‌ ‌

Optima ALU Wall Guard

LOCATION

Internal Installation

INSTALLATION

With Glue

PROPERTIES

Plastic covered with a 0,12 mm thick layer of aluminium or stainless steel

MATERIAL

Plastic laminated with aluminium or stainless steel

SIZE

Available width: 170mm, 220mm, 300mm
Commercial length: 4m

 ‌

Steel Wall Guard

Flat wall guard made of brushed stainless steel is designed to be used on doors and walls which are particularly exposed to getting damaged or dirty. Steel wall guards meet the strictest standards for quality and building industry regulations. They can be used for many years. When used as a door shock absorber, it prevents walls from getting damaged caused by the constant pedestrian traffic or trolleys and it hides already existing damages.

Two possibilities to assemble it: by means of a self-adhesive tape or with the use of a surface glue.

PRODUCT‌ ‌REFERENCE‌ ‌

Steel Wall Guard

LOCATION

Internal Installation

INSTALLATION

With Glue

PROPERTIES

Plastic covered with a 0,12 mm thick layer of aluminium

MATERIAL

Stainless Steel

SIZE

Available width: 110mm, 170mm, 220mm, 330mm
Commercial length: 2m, 3m

 ‌

Strong Wall Guard

The product is addressed to protect building walls, where high risk of wall damage or getting dirty, mainly caused by people, forklift trucks or pallet trucks passing by, may appear.

The product is made of vinyl resin with the additive of acryl which is a material with very high hardness and is crack- resistant. Thanks to this combination, a really hard surface that is resistant to scratching or getting permanently dirty has been obtained.Its surface makes the material catch less dirt and it is easier to clean.Thanks to a wide colour range, it is suitable for interior finishes and design of public places such as : health care centres, schools, offices, shopping malls, hotels or even houses.It is recommended for straight walls with homogeneous structure. It is available in two assembly versions: self-adhesive and with the use of an assembly glue

PRODUCT‌ ‌REFERENCE‌ ‌

Strong Wall Guard

LOCATION

Internal Installation

INSTALLATION

With Glue

PROPERTIES

Thickness: 3,5 cm

MATERIAL

Aluminium & PVC

SIZE

Depth: 35 mm
Available width: 150 mm
Commercial length: 4m

 ‌